Weld Racing RT-S S71 Wheel 15x10 Black (94-04 Mustang , GT , Cobra)

Special Price $761.00 was $871.40
SKU
WLD-71MB-510A65A
Welds 94-04 Wheels
Our layaway program allows you to make payments whenever you can. Once you pay off your layaway purchase, we will ship your new products to you.

PRODUCT DESCRIPTION

IRS Equipped Mustangs: 1/2 wheel spacer is required with longer wheel studs plus caliper banjo fitting nut will need to reduced to half its current size & fitting itself rounded on corner closest to the wheel. Stock rear outer tie rod will need to be replaced with aftermarket.

Weld RT-S Wheel Kit
Bolt on this 1994-2004 Mustang Weld RT-S wheel kit to clear your big front brake kit! Weld has long been known as the leader in Mustang drag racing performance. The RT-S S71 wheel has become the standard for what racers look for in a drag wheel. This set of Weld RT-S wheels is specifically made to clear the larger 13" front brakes found on many 1994-2004 Mustangs.

Weld RT-S S71 Wheels
The 5-spoke Weld RT-S S71 wheels are sure to turn heads when you're pulling up to the staging lane as well as flying down the track. These 3-piece modular wheels have a black anodized face contrasted by a high polished lip. Weld utilizes a forged billet center with cold forged rim shells for strength and durability. These light weight wheels can handle a hefty 1,580lbs per wheel and 3,160lbs per axle.

Wheel Specs:
Size: 17x5"
Offset: -20mm
Backspacing: 2.2"
Weight: 16.2lbs
Lug Pattern: 5 x 4.5"

Size: 15x10"
Offset: 21mm
Backspacing: 6.5"
Weight: 16.46lbs
Lug Pattern: 5 x 4.5"

Lug Nut Info
Requires the use of 1/2-20 short shank style lug nuts WLD-6011456 for the rear 15X10 wheels. 17" Weld RT-S require spline drive lug nuts. Not included.

Does Not Fit
While we do not recommend these wheels be used in the following applications they can be made to work by grinding on the rear outer tie rod as well as the knuckle for clearance. Low profile IRS subframe bolts will be needed as well.

-99-04 Cobra with IRS
-79-04 Mustang with IRS Swap
-Cobra rear brakes require the hex head of the banjo bolt, and the block to be ground down slightly at an angle for clearance!

Application
-Fits 1994-2004 Mustang


TPMS Sensor Note
Due to the design of these wheels, standard Ford TPMS sensors are not compatible. Placing these wheels on your Mustang with TPMS sensors will cause the warning light to illuminate with a TPMS fault.

More Information
Condition New
Warranty 1 Year
Manufacturer Weld
Manufacturer Part No WLD-71MB-510A65A
Write Your Own Review
You're reviewing:Weld Racing RT-S S71 Wheel 15x10 Black (94-04 Mustang , GT , Cobra)