Fore Innovations CTS-V3 Fuel System (dual pump)

MAP or static referenced direct injection supply fuel system up to 1000 rwhp with dual fuel pumps (recommended to run one pump full time, then activate secondary pump under load). Supplies High Pressure Fuel Pump (HPFP) and auxillary port injection or wet nitrous. Includes in-tank supply system that retains OE transfer, fuel level senders, and EVAP functionality, upgraded feed and return lines, high capacity filtration and check valve, flow through t-block direct mounted on HPFP inlet tube, high capacity F2i regulator with provisions for static reference. 

Fuel system becomes E85 capable by choosing F90000267, F90000274, F90000285 fuel pumps AND microglass SSD or stainless filtration.

Tuners are still working out the integration into the OE electrical system. Fore Innovations will provide detailed assistance on function of supplied components; however, we will not provide assistance with integration/tuning.

This fuel system will allow fuel to vaporize at the HPFP inlet and places the HPFP at risk for starting dry. Fore Innovations recommends an auxillary prime method be implemented to ensure liquid fuel (not vapor) is supplied to pump before engine start. We offer an optional prime button and time; however, we have found that some installers/owners prefer the prime function be assigned to the brake pedal or clutch pedal.

 

-35 feet of fuel line (your choice) 
-10 billet compression style hose ends
-Qty 4, billet low profile 90 degree AN to o-ring fittings
-Qty 3, billlet straight AN to o-ring fittings
-Qty 1, 3/8 EFI female to ORB-10 male adapter
-Qty 1, ORB-8 plug (can be removed to feed nitrous)
-Qty 10, hose straps with stainless mounting screws