Comp Cams Stage 1-3 CR NSR NA Camshafts (15-17 Coyote)

Features & Details

• Stage 3 
• Hydraulic Roller Cams
• 2015 to Present 5.0L Coyote Engine
• Advertised Duration: 278
• Valve Lift Int: .516
• Valve Lift Exh: .514
• Duration @ .050 Int: 235
• Duration @ .050 Exh: 237
• Lobe Separation: 131

• Stage 2 
• Hydraulic Roller Cams
• 2015 to Present 5.0L Coyote Engine
• Advertised Duration: 274
• Valve Lift Int: .516
• Valve Lift Exh: .514
• Duration @ .050 Int: 231
• Duration @ .050 Exh: 233
• Lobe Separation: 129

• Stage 1
• Hydraulic Roller Cams
• 2015 to Present 5.0L Coyote Engine
• Advertised Duration: 270
• Valve Lift Int: .516
• Valve Lift Exh: .514
• Duration @ .050 Int: 227
• Duration @ .050 Exh: 229
• Lobe Separation: 127

The new CR cam series from COMP Cams® is designed to greatly improve upon stock 2015 Coyote camshafts and work without modifications to the engine’s cylinder heads or phasers.

COMP Cams® 2015 Ford Mustang Coyote CR Series Camshafts are the first new cam and core series for 2015 and later Coyote engines. New lobes improve upon the 2011-2014 XFI™ Camshaft Series and feature faster ramps, more lift and more area under the lift curve. The cams work with stock 2015 valve springs and the new Ford mid-lock phaser system without requiring limiters or any other phaser modifications. Three grinds are available for naturally aspirated engines with two designed specifically for blower applications. All are no-springs-required for easily installation in the vehicle. However, two spring kits (part nos. 26113 and 26125) are available for those that would like more spring with high boost or who really want to push RPM limits. COMP Cams® 2015 Ford Mustang Coyote CR Series Camshafts are the absolute best way to unlock the power potential of the brand new Coyote engine. They are also available for 2011-2014 Ford Coyote applications.

Application. The Comp Cams Stage 1-3 NSR  camshafts are sold as a set of four for your 2015-2018 5.0L 4V-powered Coyote Mustang. These DOHC Comp Cams Stage 3 Camshaft require the use of 3.73 or steeper rear gears and full length (long tube) headers.

Technical Notes. These DOHC Comp Cams Stage 3 Camshaft require the use of 3.73 or steeper rear gears and full length (long tube) headers, as well as a phaser limiter kit and custom ECU programming. 

*NOTE: These cams are for 2015 and newer Coyote engines ONLY.*

**This product is NOT legal for sale, installation, or use on a licensed vehicle in the state of California, and they do NOT meet CARB compliance.  Legal only for racing vehicles which may never be used upon a highway. Not applicable or intended for street or highway use.**