Products

PTS C7 Single Performance Turbo System Kit

PTS C7 Single Performance Turbo System Kit

More Views

Quick Overview

80mm GT45R frame turbocharger, we have been successful in making 600whp and 700wtrq on just 7 PSI of boost on a completely stock LT1 Auto C7 corvette, this turbo can support up to 1000whp.
Our Price: $7,299.99 $7,599.99

As Low As

Quantity:  
Save in Wish List | Email to a Friend
?


PSTFAB

SKU: PTS0001

Condition: New, Availability: In stock.

Shipping: Free Shipping

Waranty: 1 Year

Be the first to review this product

The PTS C7 Corvette Single Turbo kit is the first over the counter single turbo kit offered for the C7 Corvette. This kit works for base, Grand Sport and Z06 models. This turbo system is specifically designed for fast spooling. Even with large turbos, we are able to achieve full boost before 4000rpm and peak power all the way to red line. Fast throttle response, quiet operation, tons of mid range power, with high quality parts and materials, fully hand fabricated and TIG welded in house. Kit installs easily, with basic hand tools and can be done in an afternoon in your garage. Simplicity starts with using the stock passenger manifold and bolting on the rest of the kit from there. Cross over piping is fully constructed from 2.5″ formed .065″ wall stainless tubing, for unmatched strength the included driver side tubular manifold is built from schedule 10 1.5″ 304 stainless ( .120″ wall thickness ) using all interlocking V band connections for a leak free seal. A JGS wastegate controls exhaust pressure within .2 lbs across the board. Charge air cooling is done with our giant PTSFAB custom 31×9.5×5″ intercooler, fitted with a 50mm BOV to keep boost pressure under control on and off the throttle. This system uses a full 3.5″ down pipe that leads to a Y pipe that can be fitted to either stock mid pipes or used in conjunction with aftermarket mid pipes. This kit requires NO cutting of the car, no modifications that permanently change any parts, includes everything needed to turbocharge your C7 right out of the box!

In testing, fitted with a cast 80mm turbo, this system produced 660whp and 730ft/lbs of torque, on a stock lt1 base model corvette, using 91 octane pump gas only on only 6 lbs of boost, all through an automatic transmission with 100% stock fuel system. Full boost ramping in just before 3800 rpm and peak torque at 4200 rpm, this system gives you tons of mid range power and continues to deliver that power all the way to red line. No belt slip, no stress on the crank snout, and no drilling and pinning of the crankshaft, gives this system the leading edge over the competition. From 600whp to 1200whp this is the only system you will ever need for your C7!

For Z06 applications, you will need to swap out the factory supercharger, and run a sheet-metal intake or any other aftermarket lt4 intake manifold. You will also need a LT1 serpentine belt for your accessory drive. Both can be purchased through us, just select car model and we will contact you for intake manifold options we offer.

Everything is hand made here in the USA, all parts used are USA manufactured. 

 *This product is NOT legal for sale, installation, or use on a licensed vehicle in the state of California, and they do NOT meet CARB compliance. Legal only for racing vehicles which may never be used upon a highway. Not applicable or intended for street or highway use.*
 

System Includes

  • gt4508R 80mm 11 Blade Billet Turbo 1.15 Turbine Housing
  • 1x Tubular Driver Manifold
  • 1x Crossover Pipe (3 piece)
  • 1x 3.5″ Full Down Pipe (3 piece)
  • 1x JGS 50mm Wastegate
  • 1x 50mm BOV
  • 1x Vac Pump Relocation Bracket
  • 1x ABS Module Relocation Bracket
  • 1x 31×9.5×5″ Front Mount Intercooler
  • 1x 1/2 npt Drill/Tap Set
  • 1x 1/8 npt Drill/Tap Set
  • 8x Taylor 10.5mm Plug Wires
  • 8x Plug boots
  • 1x MAF Extension
  • 1x Turbo blanket
  • 3.5″ Intercooler Piping
  • Feed/Return
  • Vacuum Hose
  • Booster Hose
  • Silicone Couplers
  • Stainless Steel T-Bolt Clamps
  • Stainless Steel V-Band Clamps
  • All Nuts/Bolts and Installation Hardware
  • Full detailed instructions with Colored Pictures

Ceramic Coating

We now offer optional ceramic coating (+$800). Ceramic coating offers a high heat ceramic coating that is capable of withstanding temperatures between 1300°-2000°F depending on the type of coating chosen. In addition, it has very good chemical & corrosion resistance and possesses excellent thermal barrier characteristics, providing a dramatic reduction in radiated heat. This means reduced under-hood temperatures, accelerated exhaust gas velocity and a longer life expectancy for the entire exhaust system.

Use spaces to separate tags. Use single quotes (') for phrases.


Write Your Own Review