Comp Cams Stage 1-3 XFI NSR Blower Camshafts (11-14 Coyote)
Features & Details
- Designed for Bolt-On Superchargers
- Perfect for Max Boost Levels
- No Springs Required ("NSR")
- Sold as a Complete Set of 4
- Fits 2011-2014 5.0L 4V GT of F150
Product Resources
Perfect For Boost. A set of Comp Cams Stage 1- 3 NSR Blower camshafts are the perfect upgrade over the original stock cams for big power gains in the mid to upper RPM range when running an aftermarket bolt-on supercharger at higher boost levels on high revving modified engines.
No Springs Required. These cams are compatible with your stock valve springs, so there's no need to remove and replace your 32 stock springs, saving you time and money.
Application. The Comp Cams Stage 1-3 NSR camshafts are sold as a set of four for your 2011-2014 5.0L 4V-powered Coyote Mustang or F150
No Springs Required. These cams are compatible with your stock valve springs, so there's no need to remove and replace your 32 stock springs, saving you time and money.
Application. The Comp Cams Stage 1-3 NSR camshafts are sold as a set of four for your 2011-2014 5.0L 4V-powered Coyote Mustang or F150
Technical Note. The installation of these Comp Cams will require a phaser limiter kit and custom ECU programming.
**This product is NOT legal for sale, installation, or use on a licensed vehicle in the state of California, and they do NOT meet CARB compliance. Legal only for racing vehicles which may never be used upon a highway. Not applicable or intended for street or highway use.**
| Condition | New |
|---|---|
| Warranty | 1 Year |
| Manufacturer | COMP cams |
| Manufacturer Part No | Coyote Cams |
Write Your Own Review
STAY CONNECTED
Sign up to be the first to hear about us