Nitrous Outlet 2005-10 Mustang GT Hardline Plate System

$1,085.99
SKU
00-10143-10
Gain up to 200 HP. This wet nitrous plate system comes out of the box ready to spray up to 200 HP but is capable flowing up to 400 HP with additional jetting, and a 6 AN main feed line upgrade.
Our layaway program allows you to make payments whenever you can. Once you pay off your layaway purchase, we will ship your new products to you.

Gain up to 200 HP. This wet nitrous plate system comes out of the box ready to spray up to 200 HP but is capable flowing up to 400 HP with additional jetting, and a 6 AN main feed line upgrade.

Superior Atomization. This injection plate has 6 specially designed nitrous and fuel discharge ports that completely saturate the air intake charge for the best atomized mixture possible. For higher horsepower levels proper distribution into the air stream is critical for equal cylinder to cylinder distribution.

Wet Nitrous Plate. This system includes a billet aluminum plate to fit Mustang GT 3 valve intakes and is capable of flowing up to 400 HP of nitrous. Each billet plate has a black anodized finish with engraved logo and fuel/nitrous labels.

Vehicle Specific. The Nitrous Outlet 2005-2010 3V Mustang specific nitrous system is the safest, best fitting, and most tuner friendly system available.This system is designed specifically for the modular 3V 4.6L V8 platform, including vehicle specific solenoid brackets, pre-bent hardline, Billet fuel line adapter and application specific hardware so that you will not have to order special fittings or different length hoses for a custom looking install. In return you get the best fitment and cleanest install on the market.

Wide Open Throttle Activation. This system includes a wide open throttle (WOT) switch that only allows the system to be activated when the motor is at full throttle. This safety feature will prevent engine damage and lean spikes.

Complete System. This system includes all of the necessary components; billet aluminum nitrous plate, jetting, hardware, fuel line adapter, and wiring to properly install a wet nitrous system on your vehicle.

Application. This system is specifically designed to fit 2005-2010 3V V8 Mustang.

**This product is NOT legal for sale, installation, or use on a licensed vehicle in the state of California, and they do NOT meet CARB compliance. Legal only for racing vehicles which may never be used upon a highway. Not applicable or intended for street or highway use.”**

Additional Information

 

SKU 00-10143
Number of Stages Single Stage
Max Flow (Per Stage) 450
Dry/Wet Wet
Number of Solenoids 2
Nitrous Solenoid Size .122 Orifice
Fuel Solenoid Size .187 Orifice
Relay and Harness Included? Yes
Fuel Adapter Fitting Included? Yes
Included Jetting (in Horsepower) 50-100-150-200
Fuel Pressure 45-55 PSI
Single Or Dual Stage Single Stage
Type Of Fuel Rail Stock Fuel Rails
Solenoid Bracket(s) Vehicle Specific
Main Feed Line Size 4AN
Hard or Soft Line (From Solenoids) Hard Line
Vehicle Make Ford
Vehicle Model Mustang
Vehicle Year 2005, 2006, 2007, 2008, 2009, 2010


More Information
Condition New
Warranty 1 Year
Manufacturer NItrous Outlet
Manufacturer Part No 00-10143-10
Write Your Own Review
You're reviewing:Nitrous Outlet 2005-10 Mustang GT Hardline Plate System