Harrop TVS2650 SUPERCHARGER KIT | LT4 | ZL1 | C7 CORVETTE | CTS-V
KEY FEATURES:
- Featuring Eaton R2650 rotating group with 170 degree lobe helix angle for unrivaled thermal efficiency
- TVS2650 rotating group is proven to be 1200+ HP capable
- Reduced inlet air temperatures and recovery compared to the factory system
- Direct replacement for the factory TVS1740 Supercharger assembly
- Front Drive/Front Inlet design for shorter less restrictive intake path to improve boost response
- Utilises the factory water-to-air intercooler system with the addition of 2.5x larger intercooler cores, a billet reservoir and high flow 22mm molded hoses creating a much more efficient intercooler system
- Supercharger manifold incorporates independent input drive assembly and throttle body housings allowing flexible throttle body applications
- Retains the throttle body position close to OEM enabling standard intake tube to be utilised and the fitment of most aftermarket air intake systems
- OEM fuel line is re-routed and retained
- Thermal insulators and various 8PK Supercharger drive pulleys available at time of purchase
- Designed & Manufactured by Harrop to OE levels of appearance and operation
- Retains all factory ancillaries including A/C, Viscous engine fan and Power Steering
Harrop is proud to release the innovative TVS2650 Supercharger upgrade for the factory TVS1740 Supercharged LT4 6.2L V8 found in the ZL1 Camaro, C7 Z06 Corvette and CTS-V Cadillac. The Supercharger upgrade utilises the largest, most-efficient rotating group ever produced by Eaton, the TVS2650 and enhances the intercooler system with 2.5 times larger twin, dual pass intercooler cores integrated in the manifold assembly.
The front drive / front inlet design allows for a shorter less restrictive intake path allowing for improved airflow and superior performance. Like all Harrop products our TVS2650 LT4 Supercharger is expertly assembled by qualified Supercharger technicians to ISO9001 quality standards, before being individually tested in-house on a dynamometer to ensure reliability and durability.
APPLICATIONS:
- Chevy ZL1 Camaro
- CTS-V Cadillac
- C7 Z06 Corvette
PERFORMANCE:
- Capable of over 1200hp+ with supporting engine modifications
- Note - Quoted power figures are measured at the hubs on our Harrop HQ dynamometer
NOTE: There may be additional and/or custom parts required to complete supercharger fitment into an LS swapped vehicle.
The customer is responsible for checking and determining supercharger engine kit will be suitable for their vehicle.
Important Information:
Products sold without calibration require the consumer and installer take on the responsibility to tune the vehicle on a reasonable basis for emissions compliance. Products provided with no calibration are not eligible for supplemental warranty and are not legal for use in the state of California. Please visit the SEMA emissions page to check your local emission requirements.
Kits sold with calibration are CARB compliant for use in California and 50 state legal, any kits sold outside of the USA will require the end consumer to check and verify emission compliance with there local laws and regulations. It is the responsibility of the installer and end user to ensure that this product is being used within compliance of all applicable laws and regulations.
| Manufacturer | Harrop Engineering |
|---|---|
| Manufacturer Part No | 99-KSM64K51 |
STAY CONNECTED
Sign up to be the first to hear about us