SKF C5 C6 Corvette HD Racing Bearing & Hub
BUY 4 HUBS AND RECEIVE A $25 DISCOUNT PER HUB FOR A $100 DISCOUNT!
TPS Motorsports would like to introduce a performance hub for your C5 and C6 with the heart of a ZR1. SKF manufactures the hub unit for the ultimate Corvette, the new ZR1 and is offering the same technology to the C5 and C6 owner.
The SKF Corvette Racing Hub unit is designed to provide high stiffness during cornering, thereby reducing piston knock-back and the need to tap the brakes (confidence tap). It is also designed for durability and to maintain preload at sustained loading of 1.2g! All this adds up to faster lap times and better driver feedback. If you have upgraded your Corvette's performance, you will want these SKF hubs.
You gain increased stiffness for better brake performance under high loads, higher preloads, <10 micron run-out and much increased durability. Under race and competitive use you may go an entire season without replacement.
Improve your Corvette's handling, brake performance and hub durability with these new SKF Performance hubs.
PLEASE NOTE: From 1997-2008 GM used 30 Spline hubs. During the 2009 Model year GM decided to upgrade all cars to the C6 Z06/ ZR1 33 Spline hubs. If you have a 2009 NON-Z06/ NON-ZR1 Corvette you will need to pull the hubs off and count the splines to ensure you are ordering the correct hubs. If you have a C6 Z06 or ZR1 you will need to order the 33 Spline Version
Part # 5049D (1997-2008)-30 Spline
Part # 5044C (2009-2013)-33 Spline