Ram Jet 350 TECH SPECS:
- Engine Type: Small-Block V-8
- Displacement: 350ci (5.7L)
- Bore x Stroke: 4.000'' x 3.480''
- Block: Cast-iron with two-bolt main caps
- Crankshaft: Cast iron
- Connecting Rods: Powdered metal steel
- Pistons: Hypereutectic aluminum
- Camshaft Type: Hydraulic roller
- Camshaft Lift: .460'' intake / .481'' exhaust
- Camshaft Duration (@.050 in.): 196° intake / 206° exhaust
- Cylinder Heads: Vortec cast iron w/ 64cc combustion chambers
- Valve Size: 1.94'' intake / 1.50'' exhaust
- Compression Ratio: 9.0:1
- Rocker Arms: Aluminum Roller
- Rocker Arm Ratio: 1.6:1
- Recommended Fuel: Premium pump
- Maximum Recommended rpm: 5200
- Balanced: External
- Intake Manifold: Ram Jet PFI design
INSTALLATION NOTES:
- Comes with manual transmission flywheel -will need to change to flexplate for automatic transmission applications
- Installer to supply 12-volt power source and fuel
- See instructions for fuel pump recommendation
- Designed for pre-1976 street vehicles or any off-road vehicle
- Not intended for marine applications
- IMPORTANT! For a safe, proper, and trouble-free engine break-in, the MEFI 4 computer has a "green" mode that controls rpm during the break-in period. During this period, engine speed is limited to 4000 rpm in the first hour, 4500 rpm in the second hour, and 5500 rpm in the third hour
STAY CONNECTED
Sign up to be the first to hear about us