DSX GEN 2 Magnuson LTX 2650 Billet Supercharger Cover

We are pleased to introduce our Gen 2 replacement lid for the Magnuson LTx 2650 supercharger! Similar to our original, this is cut from a solid piece of 6061-T6. This design is intended to clear the hood on the Camaro and the C7 (with hood liner removed) when using port injection plates with the 2650. The lid was designed from scratch using hood models from each vehicle overlaid with each other to develop one piece that clears both while holding a uniform 4mm wall thickness throughout. The end result is a cover that weighs over 4lbs less than the stock Magnuson lid, clears with port plates, and provides a 31.7% internal volume increase over the stock Magnuson lid!

Powdercoating is included in the purchase price, and laser engraving is included when choosing Wrinkle Black. We can apply an OEM pattern, custom text, or a custom image if provided in the proper format (high resolution black/white or DXF outline). Engraving is available for whatever custom color you want, but it usually needs to be machined as the laser will not properly ablate most colors. Machined engravings are extra and are done on a per pattern basis depending on the required run time (an OEM LT4 pattern, for example, is $300 as it requires a six hour run time in the machine). If choosing a custom color, please review the options available at Prismatic Powders and enter the name or color code in the text box. Custom colors will add to lead time.