Faircloth Composites C7 Corvette tunneled splitter
Please Note: Faircloth Composites products are made in the USA and have a very long lead time. Lead times are 7-8 weeks and are hand made at Stafford Springs Conneticut. Shipping costs will be calculated after order is placed. Shipping costs for a hood of fender is about $400 as an example.
All products are made to order, please contact us for current lead times. Credit card processing fees will not be refunded because of cancelation due to lead times..
This carbon fiber splitter was designed for the C7 platform and uses 3 diffusers to help create a low pressure on the lower surface as well as a --" forward splitter to capture all the high-pressure air on top. It also uses a radiused leading edge to promote good flow to the underside and smooth transitions into the 11* and 14* outer diffusers as well as a large 4* center diffuser.
Please choose in the drop down if you would like just the lower undertray, the top splitter or both with or without uv clear coat on the top in the dropdown.
The splitter and undertray can be bolted together with scuff pads, support rods or through bolts or the two can be bonded together by the installer.
The end user is responsible for proper, structurally sound install. This is a high downforce splitter and MUST be attached to the FRAME. 3rd party wind tunnel testing has shown over 350# front downforce with this splitter.
| Condition | New |
|---|---|
| Warranty | 90 Days |
| Manufacturer | Faircloth Composites |
| Manufacturer Part No | Faircloth-28 |
STAY CONNECTED
Sign up to be the first to hear about us