M-6007-M50CAUTO GEN 3 5.0L COYOTE 460 HP MUSTANG CRATE ENGINE FOR 10R80 AUTOMATIC TRANSMISSION

The Ford Performance all-aluminum Gen 3 5.0L Coyote crate engine is a modern 5.0L 32-valve DOHC V-8 that uses advanced features like Direct and Port Fuel Injection, Twin Independent Variable Camshaft Timing (Ti-VCT), high flow cylinder heads, and a heightened compression ratio to deliver 460 horsepower @ 7000 rpm and 420 ft.-lb.+ of torque @ 4600 rpm (with premium fuel). The lightweight plasma transferred wire arc spray aluminum cylinder block features cross-bolted main bearing caps and thick main bearing bulkheads for bottom-end strength, optimized oil drainback and windage control to improve high-rpm performance.

• 460 horsepower 420 ft.-lb.+ of torque
• 12.0:1 Compression ratio
• Hypereutectic aluminum pistons
• Sintered steel connecting rods as used on the Boss 302 Mustang
• Forged steel crankshaft
• Aluminum block features plasma transferred wire arc spray weld line coating
• Longer 12mm head bolts for higher clamp load
• 10qt capacity composite oil pan
• Tuned composite intake manifold provides efficient air delivery and weight savings
• 80 mm single bore "drive by wire" throttlebody with variable runner control
• High Flow aluminum cylinder heads, DOHC, four valves per cylinder, Variable intake and exhaust camshaft timing
• Mustang GT 409 stainless-steel tubular exhaust manifold on the RIGHT SIDE ONLY
• Includes automatic transmission engine harness and flexplate. For applications running a non-computer controlled automatic transmission or an automatic with an aftermarket standalone transmission controller, use manual transmission Gen 3 engine M-6007-M50C and use it with the manual transmission coyote engine control pack. You will still need to source the appropriate flexplate, torque converter, and bellhousing for the automatic applications.
• Vehicle harness and PCM not included
• Use one of Ford Performance's new Gen 3 coyote wiring, PCM and installation kits for street rod/project car installation.
• Does not include alternator, for alternator kit see M-8600-M50BALT
• Engine mount bosses and bell housing mount pattern common to 4.6L modular engines
• Engine cover kit in picture is an option item sold separately. See M-9680-M50B.
• Photo and specs may vary.
• Engine weight: 445 lbs.
• Coyote Engine Exterior Dimensions with Optional Power Steering and A/C Drive Kit