Gen 3 Mustang GT Coyote Long Block

M-6006-M50C

This long block assembly is the basis for the Ford Performance all-aluminum 2018-2020 5.0L Coyote crate engine. The engine is a modern 5.0L 32-valve DOHC V-8 that uses advanced features like Direct and Port Fuel Injection, Twin Independent Variable Camshaft Timing (Ti-VCT), high-flow cylinder heads, and a heightened compression ratio to deliver 460 horsepower @ 7000 rpm and 420 ft.-lb.+ of torque @ 4600 rpm (with premium fuel). The lightweight plasma transferred wire arc spray aluminum cylinder block features cross-bolted main bearing caps and thick main bearing bulkheads for bottom-end strength, optimized oil drainback and windage control to improve high-rpm performance. This long block is a partially complete alternative to the M-6007-M50C complete engine for those that don't need a fully dressed and ready to run engine.

Fits 2018-2020 Mustang GT. This long block shares the following features and components with the M-6007-M50C Coyote engine, but comes ready for you to finish off the top end and front dress:

• Direct replacement in 2018-2020 Mustang GT
• 12.0:1 Compression ratio
• Ford Performance 2 Year 24,000 Mile Warranty
• No Core Charge
• Built by Ford using all brand new parts.
• Capable of 460 hp @ 7000 RPM
• 420 lb-ft of torque @ 4600 RPM
• Displacement 302 cu. in.
• Lightweight aluminum block which features the plasma transferred wire arc spray weld liner coating
• Forged steel crankshaft
• Sintered steel connecting rods as used on the Boss 302 Mustang
• Hypereutectic aluminum pistons
• High-flow Aluminum cylinder heads, DOHC, four valves per cylinder, Variable intake and exhaust camshaft timing
• Longer 12mm head bolts for higher clamp load
• 10 qt capacity composite oil pan
• Engine mount bosses and bellhousing mount pattern common to 4.6L modular engines.

Note: This long block does NOT include the following:

• Intake manifold and throttle body
• Fuel rails and fuel injectors
• Engine wiring harness
• Water pump pulley
• Ignition coils
• Flywheel/Flexplate
• Exhaust manifolds
• Vehicle harness and PCM
• Front End Accessory Drive System
• Engine cover kit
• Photo and specs may vary