Holley Dual Fuel Injector Modular Lo-Ram EFI Manifold (LS1/LS6/LS2 Heads)
$1,111.00
SKU
300-625
DUAL FUEL INJECTOR LS1 LO-RAM FRONT-FEED EFI INTAKE MANIFOLD KIT
The Holley LS1/2/6 Lo-Ram intake manifold kits are designed for GM LS Gen III and IV engines equipped with GM LS1/2/6 (cathedral port) cylinder heads. These intake manifold and rail kits will work with OE (Original Equipment) or aftermarket cylinder heads. The 300-625 (satin) & 300-625BK (black) front-feed, intake manifold kits provide two injectors per cylinder for hi-volume fuel demands, flexible fuel supply strategies, and dual-fuel capability. Also featured on this kit is a standard 6-1/8" x 3-1/8" burst panel flange. SFI approved burst panels, burst panel frame sets, and gaskets may be purchased from various manufacturers such as Allstar Performance or Specialty Fasteners. The front-feed, short runner, low-profile base intake manifold was conceived to package with high-boost turbocharged or supercharged induction systems with a short overall height not possible with other existing intake manifolds. This Holley Lo-Ram kit is configured for a 105mm throttle body, see Holley P/N 112-581 or similar models. The fuel rail kits come with two sets of brackets. A set for long (usually standard length) fuel injectors and a set for short (such as Pico, or LS7) fuel injectors. Holley Lo-Ram intake manifold kits include all the sealing o-rings, plugs, and fasteners required for the installation of the kit.
Features:
- Designed for GM LS Gen III and IV engines equipped with GM LS1/2/6 (cathedral port) cylinder heads
- Provides best performance for forced induction (supercharged or turbocharged) engine applications with peak power at 7000-8000 rpm, depending on the application
- Dual-injector, separate-passage, high-volume fuel rails with mounting hardware, dual-fuel capable, 8 AN o-ring portsDual-injector, separate-passage, high-volume fuel rails with mounting hardware, dual-fuel capable, 8 AN o-ring ports
- Plenum top is machined for a standard “large” 6-1/8” x 3-1/8” burst panel. Burst panels, burst panel frame sets, and gaskets may be purchased from various manufacturers such as Allstar Performance or Specialty Fasteners• Plenum top is machined for a stand
- Modular LS1 Lo-Ram design allows customization for user desired configurationsDesigned for GM LS Gen III and IV engines equipped with GM LS1/2/6 (cathedral port) cylinder heads
- Low height & compact packaging allows installation in most applications often under stock hoods
- Available with both as-cast satin and black power-coat finishes
Brand | Holley EFI |
---|---|
Color | Black |
Construction | Cast |
Emission Code | 3 |
Engine | GM LS1/LS2/LS6 |
Finish | Black |
Flange Style | EFI |
Front Height | 9.07" without Intercooler |
Fuel System Type | EFI |
Manifold Type | Lo-Ram |
Product Type | Manifold |
Warranty | Limited 90 Day |
Part Number | 300-625 |
**This product is NOT legal for sale, installation, or use on a licensed vehicle in the state of California, and they do NOT meet CARB compliance. Legal only for racing vehicles which may never be used upon a highway. Not applicable or intended for street or highway use.**
Condition | New |
---|---|
Warranty | 90 Days |
Manufacturer | Holley |
Manufacturer Part No | 300-625 |
Write Your Own Review
STAY CONNECTED
Sign up to be the first to hear about us