Ripp Superchargers 3.6L V6 Supercharger System (19-21 RAM 1500 CLASSIC / WARLOCK)

FOR 2019-2021 CLASSIC AND WARLOCK ONLY!!

NOT COMPATIBLE WITH 5TH GEN RAM!

* DUE TO THE OVERWHELMING AMOUNT OF ORDERS PLEASE ALLOW UP TO 6 WEEKS FOR YOUR ORDER TO BE ASSEMBLED AND SHIPPED *

• Please note: These systems require professional installation with mechanical knowledge and support. Modifications to your vehicle will occur during installation. 
• Tune included but vehicles should be DYNO tested and tuned by a professional. 11-13psi of boost, gaining 175+HP! 

The RAM V6 is a lot of truck for the money but there's no hiding that this vehicle's 3.6L V6 Pentastar engine still lacks overall horsepower. This lack of power becomes even more noticeable when towing, off-roading, or even just by adding some bigger tires. RIPP Superchargers now has a complete bolt on solution for you. This supercharger kit includes all of the necessary hardware and electronic components to install into your vehicle in under 9 hours. As tested on our Dyno Dynamics Dynamometer the factory V6 Ram makes a measly 260 horsepower at the wheels. After installing the supercharger power output is raised to *442HP & 410ft/lbs of torque at the rear wheels! That's a 182hp GAIN!, You'll have more power then a 5.7L or 6.4L Hemi V8 and retain a respectable mpg for daily use. 

This kit is designed to perform check-engine-light free with all emissions and knock control features active, making it the most reliable V6 RAM Supercharger kit available. All this is done on a completely factory engine and drivetrain without any internal modifications required. This new-found power will make all aspects of owning your V6 RAM better, including but not limited to; towing, off-roading, camping, soccer practice, and tailgating. Okay we're not really sure how it'll make the last two better, but now you have a supercharger! So load up that trailer! Pile in, and show your friends how cool your supercharged Ram is!

What's included:

Vortech V3 Si Trim Supercharger (Self Contained and Helical-cut gears)
PCM unlock service. (Only applies to 2015+ vehicles.) (use drop down menu)
Vortech maxflow Bypass valve / blow off valve
High boost PCV valve
Idler pulleys
Plug and Play Fuel Injectors (FIC)
2.25-2.5" Mandrel bent aluminum charge pipes
HP-Tuners Mvip2 - (RIPP tune included)
RIPP MAP sensor
Pre- assembled Mounting Brackets and hardware
Gates Belt
RIPP Custom Air Filter
All necessary Hardware
4 Ply Black Couplers and clamps
Vacuum lines, Vacuum T and fittings
Zipties
Fully Illustrated Color Instructions
1 Year Warranty