Synergy C6 Corvette Trunk Water Tank

Superchargers and turbochargers build boost and with boost building and air compression comes heat.  Stock cooling systems like the C6 ZR1's 1 gallon factory water tank just don't cut it when it comes to effectively cooling pull after pull. When your intake air temperature (IAT) reaches 140 degrees or so your ECU starts pulling timing (power) from your setup.

The solution? More water.

Synergy's C6 Corvette trunk water/ice tank system was designed specifically for your C6 Corvette and includes all parts to get from the trunk to your engine bay including the EMP pump!

This innovative system not only has a unique space-saving fitment in the trunk cubby at the driver's side rear of your C6 it also has a spot to house an EMP pump directly in the pump chassis!

This trunk system features a completely unique sump setup, improving water scavenging over the traditional flat tank designs. The sump system allows for an easy install of the EMP Pump with only two low profile -16AN ports showing. Unlike traditional mounting methods we use a plate mounting system so there are no brackets or mounts you will have to drill.

The tank holds a kiddie-pool sized 6.5 gallons of fluid and features a -10AN drain port.  The water tank's drain is designed to stop draining before the sump section to avoid having to prime the water pump each time you ice the system down. Drain kit is sold separately. 

A full 6 inch Beckson Marine lid with lid key is included for easy opening plus a breather fitting on the tank to allow the tank pressure to vent to open the lid without difficulty.

The system comes with everything you will need including two -16AN hose ends, one Synergy billet Y block to feed the inlets and two boxes of 1 inch Vibrant silicone hose - enough to run the length of the car to both bumpers on both sides of the car.

Notice: Due to a national shortage of shrink clamps we will be substituting the shrink clamps with pinch clamps.

Shrink clamp part numbers for reference: 3/4 inch hose 32929 and 1 inch hose 32934.