TPS C6 C5 Z51 OE Big Brake Kit * Stage 2

Have you always wanted larger brakes but didn't want to pay over $2000 for a big brake kit? TPS has a great solution for you without breaking the bank! With this kit you'll increase you front rotor size from 12.8" to a 13.4" and the rear increases from 12" to 13"! All you have to do is install the supplied caliper brackets and rotors and you'll be sporting your new Big Brake Kit! This great kit works on all C5 & C6 Corvettes BUT requires 18" wheels! TPS Performance Brake Rotors for Corvette's provide better stopping than the stock rotors and the performance look of drilled rotors is an outstanding visual upgrade. These rotors are designed to eliminate out-gassing while minimizing stress cracks. These rotors are made by Centric the owner and maker of $3000 Stoptech brake. -Set of 4 (2 front & 2 rear) -Stops Better Than Stock Rotors -2 Front and 2 Rear caliper brackets -Motul 5.1 Brake Fluid -Hawk HPS Front & Rear Brake Pads -TPS Stainless Steel Brake Lines -Drilled For Performance Look -Bolt-On Installation -Fits 1997-2011 Please note: This kit requires 18" wheels ___________________________________ HAWK HPS DECRIPTION The High Performance Street (HPS) Compound can provide 20-40% more stopping power over stock brakes! The unique Ferro-Carbon formula was developed for street performance using safety and quality of Aerospace and Motorsports severe-duty friction technology. Features: * Easy on rotors * Low dust * Noise-free * Extended pad life ___________________________________ TPS STAINLESS LINES DESCRIPTION TPS Stainless Steel braided brake lines are made using extruded Teflon hose and is braided with stainless steel and permanently crimped on each end. All TPS Stainless Steel brake lines are made to MVSS-1066 specifications, meeting D.O.T. Certification. TPS Brake lines carries a limited life time warranty against all manufacture defect! All TPS brake lines are made in U.S.A to ensure they the highest quality product! Benfits of TPS S.S brake lines: * Kit comes with everything you need (banjo and washers) to mount the set. 100% plug and play install. No modifications needed. * Coating is designed to resist weather, chemicals and abrasion for long term value. * Increase your brake feel and increase pedal response. Eliminate the spongy factory installed rubber lines which expand during braking. * Eliminate brake "fade" while giving better mid-braking feel across the entire spectrum. * Reduced volumetric expansion * Shorter braking distance ___________________________________ MOTUL DOT 5.1 DESCRIPTION 100% synthetic fluid for hydraulic-actuated brake and clutch systems. Specifically designed to resist the high temperatures of actuated (steel or carbon) racing brakes and clutch systems. Non-silicone based, long life and 100% synthetic, Dot 5.1 brake fluid conforms to the highest standards in brake fluid performance. DOT 5.1 is specially designed for Anti-Locking Brake Systems (ABS). With a high dry boiling point of 270anddeg;C and a high wet boiling point of 185anddeg;C, DOT 5.1 delivers the best brake performance. Non-silicone based and 100% synthetic fluid. DOT 5.1 is specially designed for Anti-Locking Brake Systems. High dry boiling point of 270anddeg;C. Wet boiling point of 185anddeg;C. DOT 5.1 delivers the best brake performance.